All Rights Reserved.
© Copyright 2013 CENTURYPLY

  • ddb7b324bee9952
  • For people with a natural sense of aesthetics, Flexo Laminate is the ultimate communion of modern art and cutting-edge technology. This line of post-forming laminates is perfect for rounded and bull-nosed edges of a surface for achieving the desired look. Available in a wide range of international designs, Flexo Laminate is an essential lifestyle statement for any contemporary home.

     

    USP

    Higher flexibility

    Smoother surface, no sharp bends after forming for a clean, uncluttered look

    Greater color fastness as a result of primary pigments used on latest, international designs

    Conforms to International Standards set by NEMA LD3, ISO 4586-1 and IS 2046

    Very popular as modular furniture, cabinets, desk fronts, wall racks, kitchen workstations and counter tops

    Thermo forming of the laminate to the lowest radii of curvature and bull nosing for convex and concave shapes

    Smooth finish with no sharp bends after forming

    Best substrates bonding as a result of uniform and superior sanding Care Instructions The surface should be gently cleaned using a very mild soap Use of hard brushes on the laminate surface is not at all recommended Do not use any sharp objects like knives and cutter machine on the surface of the laminate Utensils taken straight off the gas oven should not be placed on the laminate

     

    Specification
    Higher Flexibility

    Speciality Products

     

    Size
    Thickness- 0.6 mm

     Industry Norms   Test Results

    TECHNICAL INFORMATION

    Thickness (mm)
      0.6mm (± 0.10%)   0.6 mm
    Resistance to surface wear
      ≥ 350 (min)   > >375 (revolutions)
    Resistance to immersion in boiling water Mass increase (%)
      22.0% (Max)   12.4% (Max)
    ​Resistance to immersion in boiling water Thickness increase (%)
     24.0% (Max)   13.90% (Max)
    Resistance to dry heat 180º C 
      Should pass test   Passed
    Dimensional stability at deviated temperature Lengthwise (%)
      0.75% (Max)  0.49% (Max)
    Dimensional stability at deviated temperature Crosswise (%)
      1.25% (Max)  0.85% (Max)
    Resistance to impact by small diameter ball
     20N (Min)   26 N (Min)
    Resistance to cracking
      Should pass test   Passed
    Resistance to scratching
     2N (Min)   3N (Min)
    Resistance to staining
      Should pass test   Passed
    Resistance to colour change In Xenon light
      Should pass test   Passed
    Resistance to colour change In Enclosed Carbon ARC light
      Should pass test   Passed
    Resistance to cigarette burns
      Should pass test   Passed
    Resistance to steam
      Should pass test   Passed
    Appearance
      No ABC Defects   No ABC Defects
    Specific gravity gm/c.m3
      N/A   1.36 (Min)​
  • b78fc9744b86ee6
  • f50af87b82a0954